Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Range

Bosch Range E312: Control Module Heat Sensor Not Working

On Bosch 800 Series and Benchmark slide-in ranges, for example the HGI8054UC, HDI8054U and HIIP054U, E312 means the temperature sensor on the control module is defective. That sensor watches the electronics, so without it the range…

Medium · inspection needed
Code
E312
Appliance
Range
Brand
Bosch
Warranty
30-day workmanship

What E312 means

On Bosch 800 Series and Benchmark slide-in ranges, for example the HGI8054UC, HDI8054U and HIIP054U, E312 means the temperature sensor on the control module is defective. That sensor watches the electronics, so without it the range cannot judge safe temperatures. The display shows the code, and the range may limit or stop heating. Owners often report that everything else seems normal until heating stops.

Common causes of E312

  • Defective temperature sensor on the control module
  • Control module with a damaged sensor circuit
✓ One safe check you can try

1. Let the range cool completely. 2. Reset the breaker for one minute and restore power. 3. Check that vents are clear. 4. If E312 stays, leave the range off. 5. Call us with the model number; this is not something to bypass or test at home.

! Why to stop there
  • The sensor is part of the control module, so the repair is internal.
  • The protection built around it is not something to override.
  • A guess without testing can add the wrong part.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
E312
Appliance
Bosch range
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

E312E312 questions
Is E312 an overheating warning?

No. It says the sensor that measures the module's temperature is defective. E302 and E303 are the overheating alerts, which are separate codes. The sensor measures the electronics, not the cooking temperature.

Does the oven temperature sensor matter here?

No, that is a different circuit and uses E101 and E104. E312 is only about the sensor on the control module. Mixing the two up leads to wasted parts.

Is it fixed by replacing the sensor?

It usually means a new control module. We confirm first, quote the price before work and warrant the repair for 30 days. Replacing only the sensor is rarely possible, since it is built into the board.

Book a visit

Still seeing E312?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit