When a Bosch dishwasher will not drain, start with the filter, then check the drain hose for kinks. Those two quick checks solve many cases. If the tub still holds water afterward, the drain pump or its cover is the next suspect, and that part needs a technician rather than more DIY work.
Why is there standing water in my Bosch dishwasher?
You pull the door open expecting clean, steaming dishes and find a shallow pool of gray water instead. A Bosch dishwasher that will not empty has usually run into a clog, a bent hose, or a tired pump, and you can rule out the first two yourself in a few minutes.
The pattern of what you find, together with any code on the display, tells you how far along the drain path the problem sits.
Houston kitchens add one more factor. Hard water leaves mineral film on the filter and in the sump, and heavy grease from frying tends to bind with food scraps and slow the drain over time. If your dishwasher drained fine for years and slowed down gradually, buildup is a more likely cause than a failed part, which is another reason to start with the filter.
What can you check yourself first?
Begin with the filter. Slide out the bottom rack, twist the cylindrical filter free, and rinse it under the tap. Seeds, label scraps, and bits of broken glass love to pack into it. A partly choked filter slows the outflow, and a clogged or kinked drain path is a classic reason for code E24.
Next, look at the drain hose. Slide the machine out slightly, if it moves freely, and follow the hose from the cabinet wall. A crimp, especially after a remodel or a recent move, can hold water back even though nothing is stuck inside.
- Remove the filter and rinse it.
- Peek into the sump opening for loose debris.
- Check the hose for kinks.
- Run a short rinse and watch the tub.
Switch off the dishwasher at the breaker before you reach into the tub or move the machine.
What if the water stays put?
If the tub still holds water after those checks, the drain pump is the next suspect. A blocked drain pump, or a pump cover that is loose or missing, is what sits behind code E25. Reaching it means disconnecting water and power connections in a cramped space, so this is the point to stop and hand it over.
Also check the kitchen sink. A clogged sink drain or a garbage disposal with its knockout plug still in place can keep the dishwasher from emptying even when the machine itself is fine.
How do the signs compare?
The table shows what each finding usually means and where the DIY steps end.
| Sign | Likely cause | What you can check | When to call |
|---|---|---|---|
| Gray water, dirty filter | Clogged filter | Rinse the filter, look in the sump | If the water remains |
| Water stays, filter clean | Kinked drain hose | Follow the hose, straighten it | If the hose is straight |
| E24 on the display | Clogged or kinked drain path | Filter, hose, sink drain | If it returns |
| E25 on the display | Blocked pump or loose pump cover | Stop and unplug | Right away |
| Water backs up from the sink | Sink drain or disposal plug | Check the disposal knockout plug | If the sink is clear |
When should you call a technician?
A clean filter and a straight hose that still leave you with standing water mean a technician should look at the pump. Please keep the machine unplugged until then. Technicians bring common drain pumps for a Bosch dishwasher, so many of these jobs finish during one appointment.
Do not run repeated cycles, because each one adds more water to a tub that cannot empty, and the water can back up toward the sink.
Before the visit, note whether the water drained a little, not at all, or only after you cleaned something. A partial drain suggests a restriction, while no drain at all points more toward the pump, and either detail saves time on site. Clear the area under the sink so the technician has room to work.
Frequently asked questions
Why does my dishwasher smell bad when it will not drain?
Standing water holds food particles and grows odor-causing bacteria. Clean the filter, wipe the tub floor, and fix the drain problem. Running a hot cycle with a dishwasher cleaner after the repair helps clear the smell.
Is it safe to use a drain cleaner in a dishwasher?
No. Chemical drain cleaners can damage seals, plastic parts, and the pump. Remove blockages by hand, with the power off, and let a technician deal with anything deeper in the drain path.
Does the dishwasher drain through the garbage disposal?
On many installations it does. If the disposal is new, its knockout plug may still be in place and block the dishwasher line. A clogged disposal can also hold the water back, so check it.
What does E25 mean on a Bosch dishwasher?
It points to a blocked drain pump or a loose or missing pump cover. Stop the machine and unplug it. The pump sits where water and power connections are close together, so this is a job for a technician.