Bosch Dishwasher E14: Flow Meter Reading Lost, Switched to Timed Filling
On Bosch dishwashers such as the SHEM63W55N, SHEM63W52N and SHEM63W56N, the colon display shows E:14, which people often type as E14. The far right LED stays lit, and the machine falls back to filling by time…
- Code
- E14
- Appliance
- Dishwasher
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E14 means
On Bosch dishwashers such as the SHEM63W55N, SHEM63W52N and SHEM63W56N, the colon display shows E:14, which people often type as E14. The far right LED stays lit, and the machine falls back to filling by time because the flow meter is not giving a usable reading. Bosch's repair instruction is to check the harness and replace the water inlet system on US machines if the flow meter has failed.
Common causes of E14
- Flow meter has failed
- Damaged or loose flow meter harness
- Water inlet system needs replacement
1. Turn the dishwasher off at the breaker and check the water tap is open. 2. Switch the power back on and start a short cycle. 3. Watch whether the dishwasher fills and washes normally despite the code. 4. Call us if E14 returns. Do not remove the inlet assembly yourself.
- On US machines the flow meter is part of the water inlet system.
- Replacing it means disconnecting the supply line and wiring.
- Timed filling can over- or under-fill, so waiting too long risks leaks.
Technical reference
- Code
- E14
- Appliance
- Bosch dishwasher
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dishwasher codes
Can I keep using the dishwasher?
It may still run because it fills by time. A timed fill can be inaccurate, so we suggest booking a repair soon. The meter sits in the inlet system on US machines.
What is the flow meter?
It counts water entering the tub so the control knows when to stop. Without it the machine estimates by time. Without it the control estimates by time, which is less exact than counting water.
Is a quote provided?
Yes. We give a written price before work and warrant repairs for 30 days. The inlet assembly is replaced as one unit when the meter has failed.
Still seeing E14?
A technician diagnoses it on site and gives you the price in writing before any work starts.