Bosch Dishwasher Apexx K: Temperature Sensor Short or Open
Bosch Apexx SH_99 dishwashers such as the SHV99A03, SHX99B05 and SHY99A05 show K on the lower line of the test program when the NTC temperature sensor is short- or open-circuited. The control cannot read water temperature…
- Code
- K
- Appliance
- Dishwasher
- Brand
- Bosch
- Warranty
- 30-day workmanship
What K means
Bosch Apexx SH_99 dishwashers such as the SHV99A03, SHX99B05 and SHY99A05 show K on the lower line of the test program when the NTC temperature sensor is short- or open-circuited. The control cannot read water temperature properly, so heating can be wrong. Owners do not normally see K, because it is a technician reading from the test program. A technician reads it from the lower line.
Common causes of K
- NTC temperature sensor short-circuited
- NTC temperature sensor open-circuited
- Sensor wiring or connector
1. Drop power at the breaker for a minute, then bring it back. 2. Run a normal cycle. 3. Note any long cycles or cold dishes. 4. Do not open the base. 5. Call us if the problem repeats; the sensor sits in the water path and its resistance is measured with a meter.
- The sensor sits in the water path.
- A resistance test is the only sure way.
- Replacing the wrong part wastes money.
Technical reference
- Code
- K
- Appliance
- Bosch dishwasher
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dishwasher codes
What does an NTC do?
It senses water temperature through changing resistance. The control uses that reading to decide how long to heat, so a shorted or open sensor throws heating off.
Is K the same as code 8?
Yes in meaning. On older two-digit machines, code 8 is the NTC, and on the full-text Apexx test program it appears as K. Both refer to a short- or open-circuited sensor.
Is there a warranty?
Yes. We give a written price first, and the repair carries a 30-day workmanship warranty. The sensor itself is inexpensive, so most of the work is diagnosis and fitting.
Still seeing K?
A technician diagnoses it on site and gives you the price in writing before any work starts.