Bosch Dishwasher E24: Water Will Not Drain, Cycle Ends Early
E:24 on the SHEM63W55N, SHEM63W52N and SHEM63W56N is the code many owners search as E24. The far right LED is lit, the dishwasher will not drain or ends its cycle early. Bosch lists a leaking drain…
- Code
- E24
- Appliance
- Dishwasher
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E24 means
E:24 on the SHEM63W55N, SHEM63W52N and SHEM63W56N is the code many owners search as E24. The far right LED is lit, the dishwasher will not drain or ends its cycle early. Bosch lists a leaking drain check valve, kinked or clogged drain hose, missing or loose drain pump cover, and a drain connection higher than 50 in (1.27 m) without a high loop. A power module reset comes first.
Common causes of E24
- Drain hose kinked or clogged
- Drain check valve leaking or defective
- Drain pump cover missing or loose
- Drain connection too high, over 50 inches, without a high loop
- Johnson Tee or hose extension restricting flow
1. Hold the Start button for five seconds to reset the power module. 2. Check the drain hose under the sink for kinks and a proper high loop. 3. Clean the filters in the tub. 4. Run a short cycle. 5. If water remains, leave the machine off and call us.
- Drain pump cover and check valve are inside the base.
- Rerouting a drain line risks leaks under the sink.
- The reset costs nothing, but a repeat code means a part needs testing.
Technical reference
- Code
- E24
- Appliance
- Bosch dishwasher
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dishwasher codes
What does holding Start do?
It resets the power module. Bosch recommends this before replacing anything, because a one-time glitch can set the code. That draining problem is the top listed cause, followed by cover, hose and valve problems.
Does the drain height matter?
Yes. A connection over 50 inches, with no high loop, can let water flow back or fail to leave. That reset is listed first because it clears a glitch without spending anything.
Is a written price provided?
Yes, before work, with a 30-day workmanship warranty. The work, including any part replaced, is covered for 30 days. That includes the check valve, drain hose and pump cover.
Still seeing E24?
A technician diagnoses it on site and gives you the price in writing before any work starts.