Bosch Dishwasher E:06: Door Not Latched or Door Sensor Circuit
E:06 appears on Bosch 800 Series dishwashers including the SHEM63W55N, SHEM63W52N and SHEM63W56N when a cycle stops abruptly and the Sanitized LED flashes. The control believes the door is ajar, was popped open, or that the…
- Code
- E:06
- Appliance
- Dishwasher
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E:06 means
E:06 appears on Bosch 800 Series dishwashers including the SHEM63W55N, SHEM63W52N and SHEM63W56N when a cycle stops abruptly and the Sanitized LED flashes. The control believes the door is ajar, was popped open, or that the door latch Hall sensor wiring is loose or defective. The cycle will not continue until the door signal is steady. Cleaning the seal and seating the door fix many of these.
Common causes of E:06
- Door ajar or not fully latched
- Door pushed open by the rack or misaligned in its opening
- Dirty door seal keeping the door from closing evenly
- Loose or defective Hall sensor harness at the door latch
- Hall sensor or power module needs replacement
1. Open the door and remove anything blocking the racks or spray arm from closing. 2. Wipe the door seal and the latch area with a damp cloth. 3. Close the door firmly until it clicks. 4. Check that the dishwasher sits level and square in its opening. 5. Run a short cycle; if E:06 returns, call us.
- Telling a bad Hall sensor from a bad module needs a voltage reading at the latch.
- Reaching the latch harness means opening the door panel, which exposes wiring.
- Re-leveling an under-counter dishwasher can affect plumbing connections.
Technical reference
- Code
- E:06
- Appliance
- Bosch dishwasher
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dishwasher codes
Why does E:06 stop the wash mid-cycle?
Bosch designs the dishwasher to halt when it senses the door open. A weak latch signal looks the same as an open door, so the cycle ends abruptly.
Could my door seal be the cause?
Yes. A dirty seal or a door that does not sit square can keep the latch from registering. Cleaning the seal is a safe first step. That is quick and costs nothing.
What if cleaning does not help?
We measure the Hall sensor voltage at the latch. Over 10 V points to the sensor, under 10 V to the power module. Price is given in writing first, with a 30-day warranty.
Still seeing E:06?
A technician diagnoses it on site and gives you the price in writing before any work starts.