Bosch Dishwasher E:08: Heat Pump Sees Low Water Level
E:08 is a stored code on Bosch dishwashers like the SHEM63W55N, SHEM63W52N and SHEM63W56N; it does not show during the wash cycle. The heat pump detected too little water in the sump. In US machines the…
- Code
- E:08
- Appliance
- Dishwasher
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E:08 means
E:08 is a stored code on Bosch dishwashers like the SHEM63W55N, SHEM63W52N and SHEM63W56N; it does not show during the wash cycle. The heat pump detected too little water in the sump. In US machines the main sources are something blocking water from reaching the sump, such as pots and bowls holding water, or a leak at the inlet or a kinked hose.
Common causes of E:08
- Pots, bowls or tall items catching water so it never reaches the sump
- Leaking water inlet connection
- Kinked or pinched inlet hose
- Another leak that lets water escape before it collects
1. Turn the dishwasher off at the breaker and turn the water supply off at the tap. 2. Look under the sink for drips at the inlet connection and make sure the hose is not kinked. 3. Reload with bowls tilted so they do not trap water. 4. Restore water and power and run a cycle. Call us if the problem persists.
- A leak you cannot see may be under the machine or inside the base.
- Inlet fittings can be damaged by over-tightening.
- Leaving a slow leak unrepaired can damage flooring and cabinets.
Technical reference
- Code
- E:08
- Appliance
- Bosch dishwasher
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dishwasher codes
Why did I not see E:08 on the display?
It is a logged code. The control stores it during the wash cycle, and a technician reads it with the test program. Technicians view the stored list during a test program run after the cycle, not while it washes.
Does the heat exchanger valve matter?
That valve is listed for European machines only, so we do not look for it on US models. We check loading, hose and inlet leaks. A cause such as a tilted rack is free to correct.
Can loading cause this?
Yes. Bowls and pots that hold water can keep it away from the sump. Angle them down and see if the code stops recurring. Tilting bowls downward lets water run into the sump instead of pooling on top of them, so reloading is a free test.
Still seeing E:08?
A technician diagnoses it on site and gives you the price in writing before any work starts.