Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Dishwasher

Bosch Dishwasher E:13: Inlet Water Hotter than 167 Degrees

E:13 is a logged code on Bosch dishwashers like the SHEM63W55N, SHEM63W52N and SHEM63W56N and does not show during the wash cycle. It means the water heater temperature has been turned up too high, delivering inlet…

Low risk · DIY check OK
Code
E:13
Appliance
Dishwasher
Brand
Bosch
Warranty
30-day workmanship

What E:13 means

E:13 is a logged code on Bosch dishwashers like the SHEM63W55N, SHEM63W52N and SHEM63W56N and does not show during the wash cycle. It means the water heater temperature has been turned up too high, delivering inlet water above 167 F (75 C). Technicians read it with the test program, and it is a setting issue rather than a broken part. Nothing needs to be replaced.

Common causes of E:13

  • Household water heater set too hot
  • Hot water supplied to the dishwasher above the 167 F limit
✓ One safe check you can try

1. Check the thermostat on your water heater; most households use 120 to 125 F. 2. Do not touch the dishwasher inlet or hot pipes if they feel scalding. 3. Lower the setting and let the tank settle. 4. If you cannot adjust it safely, call us or your plumber.

! Why to stop there
  • Very hot supply water can stress seals and hoses.
  • Adjusting a gas or electric water heater has its own safety steps.
  • We can confirm the logged code and the actual inlet temperature during a visit.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
E:13
Appliance
Bosch dishwasher
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

E:13E:13 questions
Why is E:13 not on my display?

It is stored in the memory, and a technician reads it using the test program. It is a warning, not a stop. Lowering the setting is a household adjustment and not a dishwasher repair, which is why this code is rated low.

What temperature does Bosch want?

Inlet water should stay below 167 F (75 C). Most homes sit far below that, so a high reading suggests the water heater was set unusually high.

Is E:13 dangerous?

The water heater setting is the concern, since very hot water can scald. We confirm the temperature, quote in writing, and offer a 30-day warranty on repairs.

Book a visit

Still unsure about E:13?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit