Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Dishwasher

Bosch Dishwasher E:16: Water Flowing with the Inlet Valve Closed

On Bosch dishwashers like the SHEM63W55N, SHEM63W52N and SHEM63W56N, E:16 appears when the flow meter senses water moving although the inlet valve should be closed. The far right LED stays lit. Bosch's instruction is to check…

High · stop use, call now
Code
E:16
Appliance
Dishwasher
Brand
Bosch
Warranty
30-day workmanship

What E:16 means

On Bosch dishwashers like the SHEM63W55N, SHEM63W52N and SHEM63W56N, E:16 appears when the flow meter senses water moving although the inlet valve should be closed. The far right LED stays lit. Bosch's instruction is to check the water inlet valve and replace it if it has failed. Water can keep entering the tub, so this one matters. It is best treated as urgent.

Common causes of E:16

  • Water inlet valve leaking through when closed
  • Water inlet valve stuck partly open
✓ One safe check you can try

1. Turn off the water supply at the shutoff tap under the sink. 2. Switch the dishwasher off at the breaker. 3. Look under and around the dishwasher for puddles. 4. Leave the supply off until we repair it; an inlet valve that leaks through can overfill the tub.

! Why to stop there
  • A valve that will not close can overfill the dishwasher and flood the floor.
  • The inlet valve connects to the supply line, and an owner can easily damage the fitting.
  • Replacement should be done with the supply off and the machine disconnected.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
E:16
Appliance
Bosch dishwasher
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

E:16E:16 questions
Why does the LED stay lit instead of flashing?

On this code the far right LED is steady. It tells the control saw flow with no valve command, so it shows the alert right away. That steady light is the sign to close the shutoff and call, not wait for the cycle to finish.

Can I keep the water on?

We advise closing the shutoff until repaired. A valve that passes water can fill the tub or leak under the unit. Closing it also protects the cabinet floor from a slow leak while you wait.

How quickly can you repair it?

Inlet valves are common repairs. You get a written price before work, and the part and labor carry a 30-day workmanship warranty. Parts and labor are included in that 30-day workmanship warranty on the finished repair.

Book a visit

Still seeing E:16?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit