Bosch Dishwasher E:22: Water Standing in the Sump
E:22 is reported by Bosch dishwashers like the SHEM63W55N, SHEM63W52N and SHEM63W56N when water is detected in the sump. The far right LED stays lit. Bosch's instruction is to drain the sump, clean the fine filter…
- Code
- E:22
- Appliance
- Dishwasher
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E:22 means
E:22 is reported by Bosch dishwashers like the SHEM63W55N, SHEM63W52N and SHEM63W56N when water is detected in the sump. The far right LED stays lit. Bosch's instruction is to drain the sump, clean the fine filter screen and the coarse multi-filter, and find and correct whatever is causing the leak. The machine has not drained properly or is taking on water.
Common causes of E:22
- Clogged fine filter screen or coarse multi-filter
- Water remaining in the sump from an incomplete drain
- Leak adding water to the sump
1. Shut off the breaker that feeds the dishwasher. 2. Remove the bottom rack and lift out the filters. 3. Rinse the fine screen and coarse filter under running water and refit them. 4. Check around the base for leaks. 5. Restore power and run a short cycle. Call us if water remains.
- A hidden leak can come from several places, and tracing it takes experience.
- Standing water can hide drain and pump issues.
- Delaying a repair risks water damage to the cabinet floor.
Technical reference
- Code
- E:22
- Appliance
- Bosch dishwasher
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dishwasher codes
Is E:22 a drain problem?
Often it starts there, because water that does not leave stays in the sump. Cleaning the filters is the quickest first step. Water that cannot leave stays in the sump, which is why cleaning the filters and checking the drain path is where we begin.
What if the filters are clean?
Then there may be a leak or a drain issue. We trace it, quote in writing, and warrant the work for 30 days. If the filters are spotless, the water may be entering from a leak, so we trace where it comes from.
Should I bail out the water?
A little scooped out with a cup is fine once power is off. Use towels for the rest and do not run the machine. A towel and a cup are enough for small amounts.
Still seeing E:22?
A technician diagnoses it on site and gives you the price in writing before any work starts.