Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Dishwasher

Bosch Dishwasher E:29: Supply Voltage Below 85 VAC

E:29 is a logged code on Bosch dishwashers such as the SHEM63W55N, SHEM63W52N and SHEM63W56N and does not show during the cycle. It means the supply voltage fell below 85 VAC on US machines. You may…

Medium · inspection needed
Code
E:29
Appliance
Dishwasher
Brand
Bosch
Warranty
30-day workmanship

What E:29 means

E:29 is a logged code on Bosch dishwashers such as the SHEM63W55N, SHEM63W52N and SHEM63W56N and does not show during the cycle. It means the supply voltage fell below 85 VAC on US machines. You may notice the dishwasher running long, dishes rinsing or drying poorly, or the cycle stopping abruptly. Bosch directs technicians to check the house wiring connections. An electrician usually solves it.

Common causes of E:29

  • Loose connection in the house wiring feeding the dishwasher
  • Weak supply circuit shared with other loads
  • Utility voltage drop
✓ One safe check you can try

1. Note whether lights dim when the dishwasher starts. 2. Avoid running the disposer or microwave while the dishwasher works. 3. Switch the breaker off and on once. 4. If the problem continues, call an electrician for the circuit and us for the dishwasher.

! Why to stop there
  • Voltage must be measured with a meter at the supply.
  • Wiring inside walls and the junction box is for licensed electricians.
  • Replacing parts will not fix a low supply.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
E:29
Appliance
Bosch dishwasher
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

E:29E:29 questions
Is this a dishwasher defect?

Usually not. The code reports the supply voltage the dishwasher saw, so the cause is typically in the wiring or circuit. Bosch lists the US limit as below 85 VAC and the European one as 170 VAC.

What does low voltage do to a cycle?

The heater and pumps work harder or slower, so cycles run long and drying suffers. A weak circuit makes motors run slowly and heaters take longer, so drying and rinsing both suffer.

Can you check it?

Yes. We confirm the voltage reading, give a written price for any work, and warrant repairs for 30 days. That reading tells us whether to send you to an electrician or move on to the dishwasher.

Book a visit

Still seeing E:29?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit