Bosch Dishwasher E:30: Supply Voltage Above 140 VAC
On Bosch dishwashers such as the SHEM63W55N, SHEM63W52N and SHEM63W56N, E:30 is logged when the supply voltage rises above 140 VAC on US machines. The dishwasher turns itself off, and the code does not show during…
- Code
- E:30
- Appliance
- Dishwasher
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E:30 means
On Bosch dishwashers such as the SHEM63W55N, SHEM63W52N and SHEM63W56N, E:30 is logged when the supply voltage rises above 140 VAC on US machines. The dishwasher turns itself off, and the code does not show during the wash cycle. High voltage can damage electronics, so Bosch directs technicians to check the house wiring connections. Turn the power off and leave it off.
Common causes of E:30
- Loose neutral or poor connection in the house wiring
- Utility or panel voltage too high
- Wiring problem raising voltage at the dishwasher
1. Switch the dishwasher off at the breaker and leave it off. 2. Notice whether lights or other electronics behave unusually. 3. Call a licensed electrician to check the voltage at the panel. 4. Call us once the supply is confirmed; we then inspect the dishwasher.
- Over-voltage can damage the power module and other parts.
- Correcting it needs an electrician's tools and permits.
- We do not want to repair a dishwasher that will be damaged again.
Technical reference
- Code
- E:30
- Appliance
- Bosch dishwasher
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dishwasher codes
Why did my dishwasher turn off?
The control shuts it down to protect itself when voltage exceeds the safe limit. Bosch lists the US limit as above 140 VAC, and the machine shuts down to protect its electronics.
Who should I call first?
An electrician should check your supply, since the cause is almost always outside the dishwasher. A loose neutral in a panel can raise voltage on one leg, which is why an electrician checks it.
Can you help after that?
Yes. We inspect the dishwasher for damage, quote in writing first, and give a 30-day workmanship warranty. Any damaged part is replaced after the supply is confirmed, with the price written down first.
Still seeing E:30?
A technician diagnoses it on site and gives you the price in writing before any work starts.