Bosch Dishwasher E:31: Water Found in the Zeolite Container
E:31 appears on zeolite-drying Bosch dishwashers such as the SHEM78ZH5N, SHEM53Z35C and SHEM53Z25C when water is detected in the zeolite container. The far right LED flashes. Water ruins the zeolite granules, and the sensor sits inside…
- Code
- E:31
- Appliance
- Dishwasher
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E:31 means
E:31 appears on zeolite-drying Bosch dishwashers such as the SHEM78ZH5N, SHEM53Z35C and SHEM53Z25C when water is detected in the zeolite container. The far right LED flashes. Water ruins the zeolite granules, and the sensor sits inside the container, so the container must be replaced. Bosch lists an overfilled or defective inlet valve, tipping the machine, or too much foam. It is one of the more expensive codes.
Common causes of E:31
- Inlet valve overfilling or defective
- Dishwasher tipped or laid on its back without removing water
- Too much foam from the wrong detergent or excess rinse aid
1. Turn off the water at the shutoff and the dishwasher at the breaker. 2. Use only dishwasher detergent and avoid hand-dish soap. 3. Do not tilt or lay the machine on its back. 4. Call us. We confirm the container condition and inlet valve before anything is replaced.
- Wet zeolite cannot be dried or repaired.
- The sensor is built into the container, so it cannot be changed alone.
- We must also fix the cause or the new container will get wet too.
Technical reference
- Code
- E:31
- Appliance
- Bosch dishwasher
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dishwasher codes
Why is water so harmful here?
Zeolite granules dry dishes by absorbing moisture. Once soaked, they stop working, so the whole container is replaced. The container is replaced because wet zeolite granules cannot be dried back to working condition.
What causes the water to get in?
Overfilling from the inlet valve, tilting the machine without draining it, or heavy foam are the listed reasons. A failed valve, a tipped dishwasher or foam from the wrong detergent are the sources Bosch lists.
Is the repair priced upfront?
Yes. A written price comes before any work, and repairs are covered by a 30-day workmanship warranty. The cause is fixed too, so the new container is not soaked again.
Still seeing E:31?
A technician diagnoses it on site and gives you the price in writing before any work starts.