Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Dishwasher

Bosch Dishwasher Code 1: Aqua Sensor Reading in Test Program

On older Bosch dishwashers with a two-digit display, such as the SHI4302, SHU3006 and SHX46A05, a technician reads code 1 in the test program. It points to the Aqua Sensor, also called Sensotronic. Customers do not…

Low risk · DIY check OK
Code
1
Appliance
Dishwasher
Brand
Bosch
Warranty
30-day workmanship

What 1 means

On older Bosch dishwashers with a two-digit display, such as the SHI4302, SHU3006 and SHX46A05, a technician reads code 1 in the test program. It points to the Aqua Sensor, also called Sensotronic. Customers do not see it on the display. When more than one problem exists, the codes add up, so heating plus filling shows 2 plus 4, or 6. Owners do not see it.

Common causes of 1

  • Aqua Sensor (Sensotronic) problem
  • Sensor wiring or connection issue
✓ One safe check you can try

1. There is no owner reset for this code. 2. If the dishwasher runs long cycles or the rinse looks wrong, let it finish and note what it does. 3. Turn it off at the breaker if something seems wrong. 4. Call us to read the test program and confirm.

! Why to stop there
  • The code appears only in the technician's test program.
  • The Aqua Sensor sits in the water path and is delicate.
  • Added codes mean more than one issue may be present.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
1
Appliance
Bosch dishwasher
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

11 questions
Why can I not see code 1?

It is part of the test program, which technicians use to read stored problems. A technician starts the test program to read the stored list of problems.

What does code 6 mean?

The codes add up. Code 6 is 2 plus 4, so a heating problem and a filling problem together. Each number is a power of two, so the sum identifies exactly which problems are present.

What does service include?

We read the test program, give a written price first, and give a 30-day workmanship warranty. The price is given to you in writing before any part is replaced.

Book a visit

Still unsure about 1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit