Bosch Dishwasher Code 2: Heating System Reading in Test Program
On older Bosch dishwashers with a two-digit display such as the SHI4302, SHU3006 and SHX46A05, code 2 in the test program reports a heating system problem. Bosch lists the heater, Hi-Limit, flow switch, NTC and the…
- Code
- 2
- Appliance
- Dishwasher
- Brand
- Bosch
- Warranty
- 30-day workmanship
What 2 means
On older Bosch dishwashers with a two-digit display such as the SHI4302, SHU3006 and SHX46A05, code 2 in the test program reports a heating system problem. Bosch lists the heater, Hi-Limit, flow switch, NTC and the control module heater relay. Owners usually notice cold dishes or long cycles. Codes add up, so 2 plus 4 shows as 6. The cause could be any of five parts.
Common causes of 2
- Heater has failed
- Hi-Limit device open
- Flow switch not working
- NTC temperature sensor reading wrongly
- Control module heater relay
1. Check that the kitchen hot tap runs hot. 2. Cut power at the breaker for a minute, then switch it back on. 3. Run a normal cycle and feel whether dishes are warm. 4. Leave the panels closed and call us if they stay cool.
- Heater circuit tests happen at live wiring in the base.
- Several parts can cause the same no-heat result.
- Resistance readings pick the right one.
Technical reference
- Code
- 2
- Appliance
- Bosch dishwasher
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dishwasher codes
How is code 2 read?
A technician enters the test program to read it. It is not shown to customers. The test program lists it as a number, so owners may never see it on the display.
Could cold supply water be the reason?
It can slow heating. We check the supply temperature along with the parts. Cold supply water can slow heating, so the hot tap is a useful first check.
Do you quote first?
Yes. A written price comes before work, with a 30-day warranty. A visit includes testing, a quote in writing and a 30-day warranty on the repair.
Still seeing 2?
A technician diagnoses it on site and gives you the price in writing before any work starts.