Bosch Dishwasher Code 16: Water Switch Reading in Test Program
Older Bosch dishwashers with a two-digit display, such as the SHI4302, SHU3006 and SHX46A05, report code 16 in the test program when there is a water switch problem. The water switch directs wash water to the…
- Code
- 16
- Appliance
- Dishwasher
- Brand
- Bosch
- Warranty
- 30-day workmanship
What 16 means
Older Bosch dishwashers with a two-digit display, such as the SHI4302, SHU3006 and SHX46A05, report code 16 in the test program when there is a water switch problem. The water switch directs wash water to the right area. A technician reads this code; owners may only notice poor wash results on one rack. Codes add up with others. Owners may only notice uneven cleaning.
Common causes of 16
- Water switch has failed
- Water switch wiring or connector
- Control module not driving the switch
1. Run a normal cycle and see whether both racks are washed evenly. 2. Flip the dishwasher's breaker off, wait a minute, and turn it on again. 3. Do not open the base. 4. Call us if one rack stays dirty or the problem repeats.
- The water switch sits in the pump area and involves wiring.
- The cause can be the switch, wiring or the module.
- A test program reading tells us which.
Technical reference
- Code
- 16
- Appliance
- Bosch dishwasher
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dishwasher codes
What does the water switch do?
It sends water to the upper or lower spray area. If it cannot move, one rack receives little water. It sends water to one rack at a time, and the control checks it with a signal.
Can I see code 16 myself?
Not on the normal display. It appears in the technician's test program. Without the test program the number is invisible to owners. The code appears in the test program.
What do you provide before work?
A written price, and then a 30-day workmanship warranty on the repair. Any repair is covered by a 30-day workmanship warranty. Quotes are in writing first. A written price is given first.
Still seeing 16?
A technician diagnoses it on site and gives you the price in writing before any work starts.