Bosch Washer Er:03: Why the Door Lock Never Engages
On Nexxt front-load washers such as the WFMC6400UC, Er:03 means the door lock does not lock (the WFMC3200UC shows E:03). Bosch attributes it to a jammed lock or a bad wire harness. The control refuses to…
- Code
- Er:03
- Appliance
- Washer
- Brand
- Bosch
- Warranty
- 30-day workmanship
What Er:03 means
On Nexxt front-load washers such as the WFMC6400UC, Er:03 means the door lock does not lock (the WFMC3200UC shows E:03). Bosch attributes it to a jammed lock or a bad wire harness. The control refuses to run a wash with an unconfirmed door, so the washer stops at the start of the cycle or soon after the door is closed.
Common causes of Er:03
- Door lock jammed and unable to latch
- Wire harness to the lock damaged
1. Press Off and open the door. 2. Check the seal and the door opening for anything stuck, such as a hanging cord or sock. 3. Close the door with a firm push until you hear it latch. 4. Start a short rinse to see if the code returns. If it does, leave the washer idle and unplugged; do not press on the latch or bend it.
- The lock and its harness share one circuit, so only a proper check separates a worn lock from a wiring problem.
- Running the washer with a defeated door lock is a safety hazard, and we will not do it.
- Replacing the wrong part wastes money; we confirm the cause and quote the price first.
Technical reference
- Code
- Er:03
- Appliance
- Bosch washer
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Washer codes
What is the difference between Er:02 and Er:03?
Er:02 means the lock will not release, and Er:03 means it will not engage. Both point at the same lock and wiring, but what you notice at the door is opposite.
My WFMC3200UC shows E:03. Is that the same thing?
Yes. That model prints the code with an E and a colon, and it also shows a small occurrence counter. The meaning matches Er:03 on the WFMC6400UC.
Can I use the washer with the door held shut?
No. The door lock is a safety device, and a washer that spins with the door unlatched can injure someone. Please leave it off until the lock is repaired.
Still seeing Er:03?
A technician diagnoses it on site and gives you the price in writing before any work starts.