Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Washer

Bosch Washer Er:08: Heater Ran Longer than Allowed

Er:08 appears on Nexxt front-load washers like the WFMC6400UC and on Vision 16 WFVC models when the heater does not shut off or its heating time is exceeded. Bosch lists a bad heater or a stuck…

High · stop use, call now
Code
Er:08
Appliance
Washer
Brand
Bosch
Warranty
30-day workmanship

What Er:08 means

Er:08 appears on Nexxt front-load washers like the WFMC6400UC and on Vision 16 WFVC models when the heater does not shut off or its heating time is exceeded. Bosch lists a bad heater or a stuck heater relay as the cause. The washer ends the cycle early, the display shows the code, and the water may be hotter than the dial setting.

Common causes of Er:08

  • Heater element failing to reach set temperature in time
  • Heater relay stuck on
✓ One safe check you can try

1. Stop the washer and pull the plug from the wall. 2. Shut the water taps. 3. Wait until the drum and door feel cool before opening anything. 4. Do not run another hot cycle. Note the program and temperature you selected, and share it with us when you call.

! Why to stop there
  • A stuck relay can keep a heater powered, which is why we do not suggest test cycles.
  • A weak heater and a stuck relay both end in the same display, and replacing the wrong one wastes money.
  • Our visit includes a price in writing before any part is ordered.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
Er:08
Appliance
Bosch washer
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

Er:08Er:08 questions
What is the 'allowed time' in Er:08?

The control expects the water to reach target temperature in a set period. If the heater is still running after that, it stops and shows the code.

Can I wash in cold until it is repaired?

A cold wash may run, but if the relay is stuck the heater can still be live. We prefer you leave the washer unplugged until it is checked.

Is Er:08 also on the WFMC3200UC?

Yes, as E:08. The Nexxt table is shared, with the colon format on the WFMC3200UC and Er on the WFMC6400UC. The meaning is identical, so the same checks apply to both models.

Book a visit

Still seeing Er:08?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit