Bosch Washer Er:11: No Water Detected in Six Minutes
Er:11 is listed on the WFMC6400UC, a Nexxt front-load washer, and on Vision 16 WFVC models; the WFMC3200UC has no E:11. The documented meaning is that no water flow was seen within six minutes of the…
- Code
- Er:11
- Appliance
- Washer
- Brand
- Bosch
- Warranty
- 30-day workmanship
What Er:11 means
Er:11 is listed on the WFMC6400UC, a Nexxt front-load washer, and on Vision 16 WFVC models; the WFMC3200UC has no E:11. The documented meaning is that no water flow was seen within six minutes of the fill start. Bosch lists an inlet valve, a wire harness, or a hose. You will see an empty drum, a quiet washer, and the code on the display.
Common causes of Er:11
- Water supply closed or hose blocked
- Inlet valve not opening
- Wire harness to the inlet valve damaged
1. Confirm both taps behind the washer are fully open. 2. Check that the supply hoses are not kinked or crushed. 3. Run a different faucet in the house to confirm there is water. 4. Turn the washer off for a minute and restart. If Er:11 returns, close the taps and call us.
- An inlet valve that does not open can still look fine from outside, so it has to be tested.
- A hose clogged with sediment can be mistaken for a bad valve, and we tell the two apart before charging for a part.
- Written price first, then work, then a 30-day warranty.
Technical reference
- Code
- Er:11
- Appliance
- Bosch washer
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Washer codes
Why six minutes?
It is the control's patience limit. If no flow arrives in that time, it assumes a supply or valve problem and stops to prevent a dry run.
Is Er:11 the same as Er:12?
No. Er:11 means no water at all arrived; Er:12 means water is coming but too slowly. The fixes overlap, but the readings differ. Think of Er:11 as nothing, and Er:12 as not enough.
Can I check the inlet screen myself?
Only if you are comfortable shutting off the taps and disconnecting a hose over a towel. Otherwise we can do it during the visit. We carry fresh hose washers if a seal needs replacing.
Still seeing Er:11?
A technician diagnoses it on site and gives you the price in writing before any work starts.