Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Washer

Bosch Washer Er:12: Fill Took Too Long

Er:12 means the water supply time was exceeded. It is listed for Nexxt front-load washers such as the WFMC6400UC and WFMC3200UC, and for Vision 16 WFVC models. Bosch points to the inlet valve, the wire harness,…

Medium · inspection needed
Code
Er:12
Appliance
Washer
Brand
Bosch
Warranty
30-day workmanship

What Er:12 means

Er:12 means the water supply time was exceeded. It is listed for Nexxt front-load washers such as the WFMC6400UC and WFMC3200UC, and for Vision 16 WFVC models. Bosch points to the inlet valve, the wire harness, or a hose, including a blocked one. The drum fills slowly or only partway, then the washer stops and shows the code. Wet laundry then sits waiting in the drum.

Common causes of Er:12

  • Blocked or kinked inlet hose
  • Inlet valve opening only partly
  • Wire harness to the valve damaged
✓ One safe check you can try

1. Open both taps all the way. 2. Look behind the washer for kinked or flattened hoses and straighten them gently. 3. Test pressure at a nearby faucet. 4. Run a short rinse after switching the washer off and on. If the fill is still slow, shut the taps and leave the washer alone until we inspect it.

! Why to stop there
  • Debris in the inlet screen can slow the fill, and removing it correctly means shutting off water and catching spills.
  • A valve that is only half-working needs testing before a replacement.
  • We tell you the price in writing before any work starts.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
Er:12
Appliance
Bosch washer
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

Er:12Er:12 questions
How is Er:12 different from Er:11?

Er:11 is no flow in six minutes. Er:12 is a fill that is slower than the control allows. In both cases the inlet path is the first place we look.

Would a water softener cause this?

A softener itself does not, but a sediment-clogged line or a partly closed valve can. We check supply pressure and the inlet screens. Slow fill can also come from a partly closed shutoff, which is a quick check.

Does it use the same code on the WFMC3200UC?

Yes. That model prints it as E:12 with a colon, and the meaning is the same. If your WFMC3200UC prints E:12 instead of Er:12, you have the same issue and the same checks apply.

Book a visit

Still seeing Er:12?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit