Bosch Washer Er:13: Drain Pump Time Exceeded
Er:13 means the drain pumping time was exceeded. It shows on Nexxt front-load washers such as the WFMC6400UC and on Vision 16 WFVC models; the WFMC3200UC prints E:13 with a colon. Bosch lists a bad drain…
- Code
- Er:13
- Appliance
- Washer
- Brand
- Bosch
- Warranty
- 30-day workmanship
What Er:13 means
Er:13 means the drain pumping time was exceeded. It shows on Nexxt front-load washers such as the WFMC6400UC and on Vision 16 WFVC models; the WFMC3200UC prints E:13 with a colon. Bosch lists a bad drain pump, a bad wire harness, or a hose, including a blocked one. Water stays in the drum, the cycle stops, and the display shows the code.
Common causes of Er:13
- Drain pump failing or jammed
- Drain hose blocked or kinked
- Wire harness to the pump damaged
1. Stop the cycle, then disconnect the plug. 2. Check the drain hose behind the washer for kinks and make sure it is seated in the standpipe. 3. If you can reach the lower filter door safely, have towels ready, because water will come out. 4. Do not open it if the drum is full. Call us instead.
- A pump that hums but does not move water needs a different repair than one that is silent.
- Sock-sized debris in the pump housing is common, but a jammed pump can also be failing.
- You see the price in writing before any part is ordered.
Technical reference
- Code
- Er:13
- Appliance
- Bosch washer
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Washer codes
Is the water in the drum safe to drain by hand?
It can be, but it may be hot and soapy. If you are unsure, leave it and call us. We have the tools to drain it without a spill.
Why do some pages list E13 and others Er:13?
The display style changes with the model. The WFMC3200UC prints E:13, and the WFMC6400UC prints Er:13, but the table meaning is the same. We note which prefix your display uses and match it to the correct table for your model.
Will clearing the code restart the wash?
Possibly, but if the drain is the cause, the code will return. A restart without fixing the pump can leave you with a full drum again.
Still seeing Er:13?
A technician diagnoses it on site and gives you the price in writing before any work starts.