Bosch Washer Er:22: Control Cannot Sync to the Line Frequency
Er:22 stands for a failed frequency synchronization. It is listed for Nexxt front-load washers like the WFMC6400UC and for Vision 16 WFVC models. On the Nexxt, Bosch names the control module; on the Vision, a weak…
- Code
- Er:22
- Appliance
- Washer
- Brand
- Bosch
- Warranty
- 30-day workmanship
What Er:22 means
Er:22 stands for a failed frequency synchronization. It is listed for Nexxt front-load washers like the WFMC6400UC and for Vision 16 WFVC models. On the Nexxt, Bosch names the control module; on the Vision, a weak power supply, and it advises checking the supply or replacing the control. The washer stops with the code, sometimes right after power-up. Lights or the display may flicker when it happens.
Common causes of Er:22
- Weak or unstable house power supply
- Control module failing
1. Shut the washer down and leave it unplugged for about five minutes. 2. Plug it directly into a wall outlet, without an extension cord or power strip. 3. Check whether lights flicker when other large appliances start. 4. Restart. If Er:22 returns, stop and call us.
- Weak supply and a bad control look alike on the display, so we check the outlet first.
- Replacing a control board on a washer fed by poor power can lead to the same problem.
- The price is given to you in writing before any part is ordered.
Technical reference
- Code
- Er:22
- Appliance
- Bosch washer
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Washer codes
Does Er:22 mean my electrical panel is bad?
Not necessarily. It means the control could not lock onto the power frequency. We check the outlet before blaming the washer. Outlets and circuits are the first thing to rule out.
Can an extension cord cause this?
It can, since it adds resistance and noise. Washers should be plugged directly into a grounded outlet. Surge strips can also cause trouble, so use the wall outlet directly whenever you can.
Is this the same on the WFMC3200UC?
Yes, where it appears as E:22. The meaning is the same, because Nexxt models share one table, with only the display prefix changing. The WFMC6400UC uses Er:22 and the WFMC3200UC uses E:22.
Still seeing Er:22?
A technician diagnoses it on site and gives you the price in writing before any work starts.