Bosch Washer Er:25: Door Lock Coil Overheated
Er:25 is a Vision 16 WFVC code; its manual names no US E-Nr. The documented meaning is that the door lock is blocked because the lock coil overheated from continuous locking and unlocking. Bosch's remedy is…
- Code
- Er:25
- Appliance
- Washer
- Brand
- Bosch
- Warranty
- 30-day workmanship
What Er:25 means
Er:25 is a Vision 16 WFVC code; its manual names no US E-Nr. The documented meaning is that the door lock is blocked because the lock coil overheated from continuous locking and unlocking. Bosch's remedy is to wait 3 or 30 minutes. The door will not lock, the cycle will not start, and the display holds the code until the coil cools.
Common causes of Er:25
- Door lock coil overheated from repeated locking and unlocking
- Door lock or its control circuit failing and overheating repeatedly
1. Press Off and leave the door closed or lightly open. 2. Wait 3 minutes, then try Start. 3. If the code remains, wait 30 minutes. 4. Avoid opening and closing the door repeatedly. If Er:25 returns after cooling, stop and call us.
- If the coil overheats again soon after cooling, the lock or its control may be failing.
- Repeated retries can damage the lock further.
- A written price comes before any lock replacement.
Technical reference
- Code
- Er:25
- Appliance
- Bosch washer
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Washer codes
Why does waiting help?
The coil is heat-protected. Giving it time to cool lets the control lock the door again. Gentle cooling is better than pressing the door lock repeatedly, which only adds more heat.
Is Er:25 the same as Er:03?
No. Er:03 is a lock that never engages on Nexxt units. Er:25 is a heat lockout specific to the Vision 16. Check the display text and your model before you compare the two.
What if it happens every few cycles?
Frequent heat lockouts are not normal. If three or four loads in a row trigger it, we should inspect the lock circuit. A written price comes before any lock work.
Still seeing Er:25?
A technician diagnoses it on site and gives you the price in writing before any work starts.