Bosch Washer dr:02: Inverter Power Switch Is Open
dr:02 is an inverter code on Vision 16 WFVC front-load washers; the manual names no US E-Nr, and the list is not used on Nexxt or current WAT, WAW, and WAP washers. It means an IGBT…
- Code
- dr:02
- Appliance
- Washer
- Brand
- Bosch
- Warranty
- 30-day workmanship
What dr:02 means
dr:02 is an inverter code on Vision 16 WFVC front-load washers; the manual names no US E-Nr, and the list is not used on Nexxt or current WAT, WAW, and WAP washers. It means an IGBT interruption, an open power switch inside the inverter. Bosch calls it a damaged inverter control and says to replace the inverter. The washer fills, then the drum fails to rotate.
Common causes of dr:02
- IGBT power switch in the inverter open
- Inverter control damaged
1. Switch the washer off and unplug it for five minutes. 2. Plug it back in and start a short rinse. 3. If dr:02 returns, stop and close the water taps. 4. Do not open the cabinet. Call us with the model number from the door frame.
- Open and shorted switches in the inverter need the same careful testing, and neither is a job for an owner.
- A new inverter should only go on after we rule out the motor and harness.
- You approve the price in writing before we order the part.
Technical reference
- Code
- dr:02
- Appliance
- Bosch washer
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Washer codes
How does dr:02 compare with dr:01?
dr:01 is a short circuit in the power switch; dr:02 is an interruption, meaning it does not conduct. Bosch gives the same remedy for both: replace the inverter.
Is the inverter the same as the control board?
On the Vision 16 the inverter is the motor drive unit. It is separate from the main control, and the two talk to each other.
Will the washer run after a reset?
Possibly for a moment, but if the switch is open, the drum will not turn and the code comes back. Either way, the drive will not be reliable, so please do not run it repeatedly.
Still seeing dr:02?
A technician diagnoses it on site and gives you the price in writing before any work starts.