Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Washer

Bosch Washer dr:21: Line Voltage Stayed Too High

dr:21 is a Vision 16 WFVC inverter code, not used on Nexxt or current WAT, WAW, and WAP washers; the manual names no US E-Nr. Bosch defines it as a line over-voltage error (long), tied to…

Medium · inspection needed
Code
dr:21
Appliance
Washer
Brand
Bosch
Warranty
30-day workmanship

What dr:21 means

dr:21 is a Vision 16 WFVC inverter code, not used on Nexxt or current WAT, WAW, and WAP washers; the manual names no US E-Nr. Bosch defines it as a line over-voltage error (long), tied to a weak power supply, and says to wait and check the line voltage. The inverter stops the drive until the supply settles, and the cycle pauses with the code showing.

Common causes of dr:21

  • Prolonged over-voltage on the house supply
  • Unstable power supply
✓ One safe check you can try

1. Turn the washer off and wait a few minutes. 2. Plug it directly into a grounded outlet, not into a strip or extension. 3. Restart a short cycle. 4. If dr:21 returns, stop using the washer and ask an electrician or us to check the outlet voltage.

! Why to stop there
  • An over-voltage that lasts is rarely the washer's doing, and the house supply may need attention.
  • Replacing parts without measuring the supply may repeat the failure.
  • We explain what we measure and quote in writing.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
dr:21
Appliance
Bosch washer
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

dr:21dr:21 questions
How is dr:21 different from dr:09?

dr:09 is a short spike; dr:21 is a longer period of high voltage. Both come from the supply side. Both still point at the power feeding the washer.

Who should check the voltage?

We can measure at the outlet during a visit. If the supply is out of range, an electrician or the utility must correct it. We never ask you to measure voltage yourself.

Is it safe to keep using the washer?

If the code returns, no. High voltage can harm the inverter, so we advise waiting for the check. A repeat means the supply, or the inverter, needs attention.

Book a visit

Still seeing dr:21?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit