Bosch Range E000: Control Module and Interface Mismatched
On Bosch 800 Series gas and dual-fuel slide-in ranges and Benchmark induction models such as the HGI8054UC, HDI8054U and HIIP054U, E000 means the control module and the user interface do not carry matching module codes. Bosch…
- Code
- E000
- Appliance
- Range
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E000 means
On Bosch 800 Series gas and dual-fuel slide-in ranges and Benchmark induction models such as the HGI8054UC, HDI8054U and HIIP054U, E000 means the control module and the user interface do not carry matching module codes. Bosch calls it a wrong module code. The range will not operate at all, and the display stays on the error. It typically appears right after a control board or touch panel has been swapped.
Common causes of E000
- Control module and user interface with different option codes
- A recently replaced board whose option code was never entered in Service mode
- Corrupted option-code setting inside the control
1. Switch off the range's breaker for one full minute, then restore it. 2. Look at the display; if E000 returns, stop. 3. Do not press keys in a sequence you found online, since that can change settings. 4. Write down the model and serial number from the door frame and call us, because the correct option code has to be entered in Service mode.
- The fix is entering the right option code in Service mode, which owners cannot reach safely.
- Guessing at key combinations can overwrite settings that are hard to restore.
- Ordering a new board without confirming the mismatch often means paying for a part you did not need.
Technical reference
- Code
- E000
- Appliance
- Bosch range
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Range codes
Why did E000 show up after a repair?
A replacement control or touch panel arrives with its own module code. If it differs from its partner, the range refuses to run. We match the option code to your exact model during the visit.
Will the range cook at all with E000?
No. Bosch designs this error to stop operation entirely until the codes agree, so burners, oven and clock functions are all unavailable until the correct option code is entered.
Can a power reset clear E000?
Rarely. A reset is worth one try, but a true mismatch comes straight back. We then set the option code in Service mode, quote the price first, and cover the work with our 30-day warranty.
Still seeing E000?
A technician diagnoses it on site and gives you the price in writing before any work starts.