The SHV78CM3N has no front of its own, because the front is your cabinetry. Behind that panel the machine is rated 42 dBA and loads 16 place settings across three racks, dries with CrystalDry, and brings AquaStop Plus plus Home Connect. Designers pick it to keep a kitchen run unbroken.
The panel is where trouble starts. An 800 Series door is heavy before a joiner adds a slab of timber, which is why Bosch publishes a weight limit for the panel. Exceed it and the door springs can be ruined inside a year.
We therefore ask about the panel on every call. Springs wear first. A leak can also hide behind the panel until the cabinet floor swells, and loose panel fixings can let the panel sag onto the plinth.
It is in Bosch's installation information for this exact model. Check it before the cabinet maker cuts anything, because a heavier panel wears the springs quickly.
Spring and panel are out of balance. Either the springs have tired with age or the panel now weighs more than it did. We adjust or replace the spring set as an assembly, and then check the panel fixings too. We adjust or replace the spring assembly.
Feel the plinth and cabinet base for damp, and notice any musty smell. If you find either, close the supply valve and call us before the cabinet is affected.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.