Underneath the HMV3052U is a lamp that most owners stopped noticing years ago. The microwave is a discontinued 300 Series unit, stainless, 30 inches wide, with 1.6 cubic feet and 1,550 watts, cooktop lighting and built-in ventilation. On a unit this old, the cooktop light deserves a look at any visit.
A lamp that shines down on a hot, greasy stove takes abuse, and the socket corrodes. Many households go years in the dark, unaware that the fix is a five-minute replacement and no reason to buy a new appliance. On many models the lamp is a job for the owner, once the breaker is off and the unit has cooled. If the holder has corroded, though, it needs replacing.
Other age-related wear lies inside. The blower motor slows as grease loads it, and the turntable motor fails after years of daily use. We check the light, the blower and the turntable, and keep the price in writing before we begin.
Nearly always, and at low cost. The bulb or the socket corrodes in that heat. If you have us out for anything else, mention it and we will take a look.
On many models it is. Shut off the breaker and let the unit cool before you start. A corroded holder, as opposed to a dead bulb, should be replaced, not forced.
Often the turntable motor has worn out after years of daily use, or the coupling is worn. Seat the tray properly first. If it still stays still, the motor is the likely cause.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.