Replacing a drawer microwave is rarely simple, and the HMD8053UC shows why. It is an earlier 30 inch model from the 800 Series with 1.2 cubic feet, 1,500 watts, a motorized drawer and no Home Connect. It is built under the counter into an opening of fixed height, width and depth.
The drawer face also forms part of the kitchen’s look. Mending the drawer mechanism usually costs less than redoing the cabinets around a different model.
After years of daily use, the drive motor and the rails wear. The control panel is on the drawer front, tucked under the counter lip, where spills from the counter land. When it stops responding, it can be replaced on its own and the cooking electronics left alone, so the whole unit is not necessarily lost. We look at the drive, then the panel.
Often more than a freestanding microwave does. Replacing it can involve carpentry as well as the appliance, and its drawer mechanism can be repaired.
Not necessarily. The panel sits just under the counter edge, where spills land, and it can be replaced separately from the cooking electronics.
The opening has a fixed height, width and depth, and the drawer face is part of the kitchen's appearance. A different model can mean cabinet changes on top of the cost of the appliance.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.