To clean a Bosch dishwasher filter, remove the bottom rack, twist the round filter out, separate the coarse and fine mesh, and scrub both under warm running water with a soft brush. Check the opening for glass or bones, then lock the filter back in. The job takes about five minutes and prevents slow drains.
Why is the filter the most important dishwasher chore?
Of all the chores a dishwasher asks for, the filter is the one that pays you back most. Ignore it and food particles pile up until the drain slows down and a drain error such as E24 shows on the display. Cleaning it needs only warm water, a soft brush, and a few minutes.
A dirty filter also hurts wash quality, because dirty water recirculates over the dishes. Cloudy glasses and gritty plates are often a filter problem, not a detergent problem.
What should you do before you begin?
Run the machine empty, if you can, so the tub is dry, and keep a towel handy. Take out the bottom rack to give yourself room. Make sure the cycle has finished and the water in the tub has drained, so you are not working in dirty water.
Have a soft brush ready. Avoid steel wool or hard scrapers, because they tear the fine mesh and let particles through into the pump.
It also helps to look at the spray arms while you are there. Spin each one by hand to make sure it moves freely, and check that the small holes along the arm are not packed with food bits. A clogged spray arm leaves dishes dirty even when the filter is perfect, and a pin or toothpick clears most blockages in a few seconds.
Do all of this with the dishwasher switched off, and let any hot water from the last cycle cool first.
How do you clean it step by step?
- Find the filter: a round, twist-lock unit on the tub floor, marked with an arrow showing which way to turn.
- Turn it in the marked direction and lift the whole assembly out. It separates into a coarse mesh and a fine one.
- Rinse both pieces under running water, scrubbing gently with a soft brush to remove greasy film and food.
- Shine a light into the opening beneath and pick out any glass, bones, or fruit stickers.
- Drop the filter back in and turn it until it locks. A filter that sits crooked can hurt the wash on its own.
While the filter is out, wipe the tub floor around the opening with a damp cloth. Greasy residue left there tends to wash straight back into the clean filter on the next cycle.
How often should you clean it?
Once a month suits most kitchens. Households that skip pre-rinsing, or cook with a lot of grease, should look every couple of weeks. Hard Houston water adds mineral film to the mesh, which is one more reason not to let it go for months.
What if cleaning does not help?
When the tub still holds water with a spotless filter, the problem has moved farther along, perhaps to the pump or pump cover behind E25. That is when it is time for a repair instead of more scrubbing. The table shows how to read what you find.
| What you find | Likely cause | What you can check | When to call |
|---|---|---|---|
| Greasy film on the mesh | Normal buildup | Scrub with warm water and a soft brush | Not needed |
| Glass, bones, or stickers in the opening | Debris blocking the sump | Remove it by hand with the power off | If water still stays in the tub |
| Standing water, clean filter | Kinked hose or weak pump | Check the drain hose for crimps | If the hose is straight |
| E24 on the display | Slow or blocked drain path | Clean the filter and check the hose | If it returns after cleaning |
| E25 on the display | Blocked pump or loose pump cover | Do not dig into the pump | Right away |
Frequently asked questions
Can I run the dishwasher without the filter?
No. Without the filter, food and glass can reach the drain pump and damage it. If the filter is cracked or missing, replace it before running another cycle.
Why does my dishwasher smell even after I cleaned the filter?
Trapped food in the sump, the spray arm holes, or the door gasket is often the source. Wipe the gasket, check the spray arm, and run a hot cycle with a dishwasher cleaner suited to your model.
What does error E24 mean?
It points to a drain problem, usually a clogged filter or a kinked drain path. Clean the filter, check the hose, and run a short rinse. If the error comes back, the drain pump should be tested.
Should I rinse dishes before loading?
Scrape off large food and bones, but a full rinse is not needed. Very clean dishes can make some detergents work less well, though heavy grease or rice left on plates will load the filter faster.