Bosch VeroCafe All LEDs Flashing: Power Supply Check
Bosch VeroCafe 300 machines such as the TIU20109, TIU20307 and TIU20508 use LED patterns instead of numbered codes. When every LED flashes, Bosch points to the power supply, which must be 120 V. The machine will…
- Code
- All LEDs flashing
- Appliance
- Coffee Machine
- Brand
- Bosch
- Warranty
- 30-day workmanship
What All LEDs flashing means
Bosch VeroCafe 300 machines such as the TIU20109, TIU20307 and TIU20508 use LED patterns instead of numbered codes. When every LED flashes, Bosch points to the power supply, which must be 120 V. The machine will not operate normally until the supply is correct, so the outlet and the circuit are the first things to look at. It is a supply message.
Common causes of All LEDs flashing
- Supply voltage not 120 V
- Loose connection at the outlet
- Shared circuit with heavy appliances
1. Unplug the machine. 2. Plug it directly into a working 120 V outlet, not an extension cord or power strip. 3. Check that no heavy appliance shares the circuit. 4. Switch on and watch the LEDs. 5. If all LEDs keep flashing, call us; a household supply problem may need an electrician.
- Outlet voltage needs a meter.
- Wiring is for licensed electricians.
- Repeated flashing can point to the machine itself.
Technical reference
- Code
- All LEDs flashing
- Appliance
- Bosch coffee machine
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Coffee Machine codes
What do all LEDs flashing mean?
Bosch lists a power supply problem for this pattern, where the supply must be 120 V. It is a power message, not a coffee message, so start with the outlet.
Can an extension cord cause it?
It can, because a long or light cord drops voltage under load. Plug the machine straight into a wall outlet and see whether the pattern stops.
What if the outlet is fine?
Then we test the machine itself. A written price comes before any work, and repairs carry a 30-day workmanship warranty on what we do. We explain each finding to you.
Still seeing All LEDs flashing?
A technician diagnoses it on site and gives you the price in writing before any work starts.