Bosch Coffee Machine Overvoltage or Undervoltage Message:
The Bosch BCM8450UC built-in coffee machine shows Overvoltage or undervoltage when the supply voltage is outside the range it accepts. The message points to the household supply instead of a part inside the machine. Brewing stops…
- Code
- Overvoltage or undervoltage
- Appliance
- Coffee Machine
- Brand
- Bosch
- Warranty
- 30-day workmanship
What Overvoltage or undervoltage means
The Bosch BCM8450UC built-in coffee machine shows Overvoltage or undervoltage when the supply voltage is outside the range it accepts. The message points to the household supply instead of a part inside the machine. Brewing stops to protect the machine and resumes only when the voltage returns to a normal level. It protects the machine until the supply recovers, and an electrician can tell you what the outlet is delivering.
Common causes of Overvoltage or undervoltage
- Supply voltage too high or too low
- Loose connection at the supply
- Shared circuit with heavy appliances
1. Switch the machine off. 2. Note whether other heavy appliances on the same circuit were running. 3. Wait a few minutes and switch the machine back on. 4. If the message returns, have an electrician check the supply at the outlet. 5. Call us once the supply is confirmed so we can test the machine.
- Voltage must be measured with a meter at the supply.
- House wiring is for licensed electricians.
- Repeated swings can damage electronics.
Technical reference
- Code
- Overvoltage or undervoltage
- Appliance
- Bosch coffee machine
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Coffee Machine codes
Is the coffee machine broken?
Usually not. The message reports the supply it sees, so the cause is more often a circuit or wiring issue than the machine itself. Nothing inside it is blamed.
Who should check the circuit?
An electrician, since house wiring and panel work are licensed trades. Once the supply is confirmed, we can test the machine itself and check it for damage.
Can you help afterward?
Yes. We inspect the machine for any damage, give a written price first, and cover repairs with a 30-day workmanship warranty on the work that we do.
Still seeing Overvoltage or undervoltage?
A technician diagnoses it on site and gives you the price in writing before any work starts.