Bosch Cooktop E7015: Electronics Ran Too Hot

What E7015 means

Cooking halts, power levels drop or the zones shut off, and E7015 shows. Inside the cooktop, the electronics that drive the heating run hot, and the control cut them back once a temperature limit was crossed. This tends to follow a long stretch on high power, or a cabinet below that traps heat. It is a protective step, so the cooktop usually returns to normal after it has had time to cool.

Common causes of E7015

Cabinet, drawer or stored items below the cooktop choking its airflow
Long cooking sessions on maximum power with no rest in between
Cooling fan inside the unit slowing or stopped

✓ One safe check you can try

1. Turn all zones off. 2. Let the cooktop rest at least 30 minutes with nothing on it. 3. Empty the drawer or cabinet directly underneath and make sure nothing presses against the vents. 4. Try a short cook on a medium setting. If E7015 comes back quickly, call us. Do not lift or open the cooktop.

! Why to stop there

A cooling fan that no longer spins is easy to miss, and running the cooktop on keeps cooking the electronics.
Repeated overheating shortens the life of the power board, which is the costly part to replace.
Guessing at a sensor replacement hides the real cause when the problem is simply airflow.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

E1Bosch Cooktop E1: Overheating Warning, or a Weak Temperature Sensor E9010Bosch Cooktop E9010: Wiring Does Not Match the Connection Diagram dEBosch Cooktop dE: Showroom Demo Mode Is Still Switched On E7010Bosch Cooktop E7010: The Home Connect Link Has Dropped E9000Bosch Cooktop E9000 / E9010: Supply Voltage Is Outside Its Range

E7015E7015 questions

How long should I wait before using the cooktop again?

Give it at least half an hour with the zones off. If the underside was crowded, clear it first. If the code returns within a short cook, something is still trapping heat or the fan is not moving air.

Is it safe to keep cooking after E7015 clears?

Short, moderate cooking is generally fine once it clears and ventilation is open. If it repeats, stop using it and let us look, since repeated overheating can damage the electronics underneath.

Does E7015 mean the cooktop is failing?

Not necessarily. A blocked cabinet or very heavy use explains many cases. A repeating code points to a fan or sensor problem, which we can confirm and price in writing before any work.