Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Dishwasher

Bosch Dishwasher E:01: Cycle Ended Early, Heater Relay or Pump Circuit

On Bosch 800 Series dishwashers such as the SHEM63W55N and SHEM63W52N, and on the SHEM78W55N and SHP65TL5UC, E:01 means the wash cycle finished prematurely. The control could not confirm the heat pump heater relay, the heat…

Medium · inspection needed
Code
E:01
Appliance
Dishwasher
Brand
Bosch
Warranty
30-day workmanship

What E:01 means

On Bosch 800 Series dishwashers such as the SHEM63W55N and SHEM63W52N, and on the SHEM78W55N and SHP65TL5UC, E:01 means the wash cycle finished prematurely. The control could not confirm the heat pump heater relay, the heat or drain pump connection, or enough supply voltage. You will see the far right LED flashing and dishes that are only partly washed. Bosch also publishes the same list for its older heat pump designs.

Common causes of E:01

  • Low supply voltage or a large voltage drop on the kitchen circuit
  • Heat pump or drain pump disconnected at the power module harness
  • Heat pump heater relay on the power module has failed
  • Heat pump or drain pump itself is defective
✓ One safe check you can try

1. Turn the dishwasher off at the breaker for one minute, then restore power. 2. Check that nothing heavy, such as a disposer, shares its circuit while it runs. 3. Start a short cycle and watch whether E:01 returns. 4. If it does, stop and leave the lower panel closed. Pump and relay checks need meter readings from a technician.

! Why to stop there
  • Pump and relay checks require measurements at the power module that are unsafe for a homeowner.
  • A low-voltage cause can look identical to a failed relay, so guessing leads to the wrong part.
  • The power module is only replaced after the pumps and wiring are proven good.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
E:01
Appliance
Bosch dishwasher
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

E:01E:01 questions
Why did the dishwasher stop partway through?

The control ended the cycle early because it could not confirm the heater relay, the pumps, or the incoming voltage. The far right LED flashes to tell you.

Can a power dip cause E:01?

Yes. Low supply voltage is one of the listed causes. If the code appears only now and then, a weak circuit is worth checking before any part is changed.

Do you quote before working?

Yes. We give a written price before any work starts, and our repairs carry a 30-day workmanship warranty. That includes checking the pump harness and, if needed, a test program run, so the fix is matched to the real cause.

Book a visit

Still seeing E:01?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit