Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Dishwasher

Bosch Dishwasher E:27: Water Switch Problem or Low Supply Voltage

On Bosch dishwashers like the SHEM63W55N, SHEM63W52N and SHEM63W56N, E:27 means the wash cycle completes prematurely and the far right LED stays lit. The water switch or its motor has failed, or the supply voltage has…

Medium · inspection needed
Code
E:27
Appliance
Dishwasher
Brand
Bosch
Warranty
30-day workmanship

What E:27 means

On Bosch dishwashers like the SHEM63W55N, SHEM63W52N and SHEM63W56N, E:27 means the wash cycle completes prematurely and the far right LED stays lit. The water switch or its motor has failed, or the supply voltage has stayed below 85 VAC. On the SHP65TL5UC chart, the same symbol simply means undervoltage, with 98 to 120 VAC expected at the harness. Bosch treats this as a two-part code.

Common causes of E:27

  • Water switch or water switch motor has failed
  • Supply voltage continuously low
  • Power module not delivering voltage to the switch
  • House wiring connection loose
✓ One safe check you can try

1. Turn the dishwasher off at the breaker and wait a minute. 2. Restore power and run a short cycle. 3. If other lights or appliances dim when the dishwasher starts, tell us. 4. Do not open panels or test outlets yourself. Call us if E:27 returns.

! Why to stop there
  • Voltage and resistance readings are live-circuit tests.
  • House wiring problems may need an electrician.
  • The switch, module and wiring each look the same from outside.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
E:27
Appliance
Bosch dishwasher
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

E:27E:27 questions
Why does the SHP65TL5UC treat E:27 as low voltage?

Its chart lists the symbol as undervoltage. Newer SHEM machines add the water switch causes, so the same code reads differently by generation. Bosch lists the lower limit as 85 VAC for US machines.

Could it be the house wiring?

Yes. Continuous low voltage below 85 VAC is a listed cause, and a loose house connection can produce it. A voltage reading at the machine tells us whether to send you to an electrician or replace a part.

What does a visit include?

We test the switch and voltage, give a written price first, and warrant the repair for 30 days. We measure the voltage and the switch before quoting, and the price is in writing first.

Book a visit

Still seeing E:27?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit