Bosch Range E010: Data Memory Problem in the Touch Panel
On Bosch 800 Series gas and dual-fuel slide-in ranges and Benchmark induction models, for example the HGI8054UC, HDI8054U and HIIP054U, E010 reports a data memory error in the user interface. Heating is disabled while it is…
- Code
- E010
- Appliance
- Range
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E010 means
On Bosch 800 Series gas and dual-fuel slide-in ranges and Benchmark induction models, for example the HGI8054UC, HDI8054U and HIIP054U, E010 reports a data memory error in the user interface. Heating is disabled while it is showing. The cooktop and oven will not start, and Bosch's documented remedy is replacing the user interface. The panel may light up and respond normally to touch before heating is refused.
Common causes of E010
- Corrupted data memory on the user interface board
- Failed user interface
- Voltage disturbance that damaged stored settings
1. Turn the range's breaker off, wait one minute, then switch it on. 2. Try a short bake at a low temperature to see if heating comes back. 3. If E010 displays again, stop using the range. 4. Call us with the model number so we can bring the proper part.
- Stored data inside the board cannot be restored by owners.
- Opening the control area exposes live wiring.
- A guessed part purchase can add days to the repair.
Technical reference
- Code
- E010
- Appliance
- Bosch range
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Range codes
E009 or E010: which one do I have?
E009 is a program check failing, while E010 points to the data memory. Both sit in the user interface and both disable heating until the interface is replaced.
Could a power outage have caused E010?
A surge or sudden loss of power can scramble stored data. A reset may help once, but a repeat means the board itself needs replacing.
Do you carry the part?
We confirm the interface for your exact model before we come out. You get a written price first, and our repair is covered by a 30-day workmanship warranty.
Still seeing E010?
A technician diagnoses it on site and gives you the price in writing before any work starts.