Having used up every permitted try at locking the oven door, an older Evolution range shows F94. Repeated failure usually means the latch is meeting resistance, not just dawdling. The manual's remedy checks motor continuity, switch…
Having used up every permitted try at locking the oven door, an older Evolution range shows F94. Repeated failure usually means the latch is meeting resistance, not just dawdling. The manual's remedy checks motor continuity, switch contacts and the wiring back to the board, and swaps the whole lock motor assembly when its windings are open.
1. Do not keep restarting self-clean to make it try again, since every failed try presses the latch into whatever is in its way. 2. With the oven cold, clean the gasket and strike area. 3. Should the door still refuse to lock, stop there and book a visit.
No. Once the lock is repaired it works again. The latch is the only part of that cycle that failed, and the whole assembly can be replaced on this platform.
Please don't. Every attempt presses the latch against the blockage, which is how a strike that only needed cleaning ends up bent. Cleaning the strike area first is the sensible order.
Regular baking does not need the lock, so it generally works. Hold off on self-clean until the lock has been checked, to avoid further damage. Simple use of the oven for roasting or broiling is not restricted.
A technician diagnoses it on site and gives you the price in writing before any work starts.