Bosch Washer Er:17: Aquastop Has Tripped
Er:17 appears on Vision 16 WFVC front-load washers; the manual names no US E-Nr. Bosch defines it as an Aquastop error: the Aquastop was actuated, or the Aquastop switch or its wire harness is damaged. The…
- Code
- Er:17
- Appliance
- Washer
- Brand
- Bosch
- Warranty
- 30-day workmanship
What Er:17 means
Er:17 appears on Vision 16 WFVC front-load washers; the manual names no US E-Nr. Bosch defines it as an Aquastop error: the Aquastop was actuated, or the Aquastop switch or its wire harness is damaged. The remedy is to eliminate leaks and check the switch and harness. The washer stops and may pump out water. Wet floor near the base is common when the protection has acted.
Common causes of Er:17
- Real leak that triggered the Aquastop
- Aquastop switch damaged
- Wire harness to the switch damaged
1. Close both water taps. 2. Disconnect the washer from power once the taps are shut. 3. Look under and behind the washer and along the hoses for water, and dry anything you find. 4. Do not restart to test it. Call us and say where the water appeared, if anywhere.
- A true leak and a false trip give the same display, so an inspection is the only safe way to tell.
- Restarting a washer that has leaked can send more water onto your floor.
- We give a written price before replacing any hose, switch, or wiring.
Technical reference
- Code
- Er:17
- Appliance
- Bosch washer
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Washer codes
Is Er:17 the same as E:17?
No. On the 300 Series, E:17 is a water inlet problem. Er:17 on the Vision 16 is Aquastop. The prefix and platform matter. The same letters can mean different things on different generations.
What is the Aquastop?
It is Bosch's leak protection built into the water supply system. When it senses water in the base, it shuts the supply. That is why a leak anywhere near it should be treated as real until proven otherwise.
Do I need a new hose?
Only if the Aquastop in the hose is the part that tripped or failed. We inspect it first and quote in writing. Many cases need no new hose at all.
Still seeing Er:17?
A technician diagnoses it on site and gives you the price in writing before any work starts.