White-fronted and rated 50 dBA, the SHE3AEM2N was the entry model of the earlier 100 Series generation, offering 14 place settings and PrecisionWash sensing. Bosch gave it the 24/7 Overflow Protection System in place of full AquaStop, and that tells us where to begin if the machine stops filling.
With overflow protection, the trip is the float in the base pan beneath the tub. No solenoid sits at the tap, so we inspect from underneath and not from behind, and a small weep around the circulation pump seal is a regular finding.
Age brings two more items. Cycles may drag on far longer than normal when the soil sensor reads the water as dirty, because PrecisionWash answers by rinsing longer. And a spray arm with a worn bearing wobbles off its path and misses the upper rack. We check the sensor lens and the arm before looking at the heater.
Not always. Sensing keeps the rinse going until the water looks clean, so a very dirty load, or a lens coated in film, stretches the program. If light loads take as long, the sensor or heater should be checked.
Probably not. The pan underneath is closed in, and the float acts before any water gets out onto the floor. For that reason, a stop in the middle of a fill gets inspected here and is not simply restarted.
A worn bearing lets the arm wobble away from its track. Fitting a new arm or bearing brings the spray back where it belongs, at little cost.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.