Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Dryer

Bosch Dryer E:13: Maximum Drying Time Exceeded

E:13 on Vision 300 series WTVC gas dryers such as the WTVC4500UC and WTVC5530UC means the maximum drying time was exceeded. The dryer ran to its limit and clothes were still not dry enough. The electric…

Medium · inspection needed
Code
E:13
Appliance
Dryer
Brand
Bosch
Warranty
30-day workmanship

What E:13 means

E:13 on Vision 300 series WTVC gas dryers such as the WTVC4500UC and WTVC5530UC means the maximum drying time was exceeded. The dryer ran to its limit and clothes were still not dry enough. The electric WTMC twin likely behaves the same, but the manual does not say, so we check on site. This is the dryer E:13, not the washer drain code of the same number on other Bosch lines.

Common causes of E:13

  • Lint filter or vent restricted
  • Moisture sensor dirty
  • Load too wet or too large
✓ One safe check you can try

1. Clean the lint filter. 2. Wipe the moisture sensor bars in the drum. 3. Spin laundry well in the washer and reduce the load size. 4. Check the vent hose and outside flap, then run a timed cycle. If E:13 returns, call us.

! Why to stop there
  • A long drying time costs energy and wears fabrics.
  • A vent that is too long or crushed needs measurement.
  • Written price first.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
E:13
Appliance
Bosch dryer
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

E:13E:13 questions
Is E:13 related to E:03?

Yes. E:03 is dryness not reached; E:13 is the maximum time exceeded. Both come from the same causes, so the first checks are the same.

Does it matter that washers also use E:13?

Yes, the number is shared. Older washers use E:13 for drain pump time. Check which appliance you have and which table applies before you search further.

Will a clean filter fix it?

Often it does, along with a clean vent. If not, we check the vent length and the sensor, then quote in writing before anything is replaced.

Book a visit

Still seeing E:13?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit