Bosch Dryer E:01: Ran Too Hot, Check Filter and Vent
On Vision 300 series WTVC gas dryers such as the WTVC4500UC and WTVC5530UC, E:01 means the dryer ran too hot. Bosch ties it to a clogged lint filter or exhaust vent duct: the burner or lint-screen…
- Code
- E:01
- Appliance
- Dryer
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E:01 means
On Vision 300 series WTVC gas dryers such as the WTVC4500UC and WTVC5530UC, E:01 means the dryer ran too hot. Bosch ties it to a clogged lint filter or exhaust vent duct: the burner or lint-screen NTC sensor detected overheating, and the dryer stopped. The Filter light may flash. The electric WTMC twin is likely similar, but the manual does not say, so we confirm it on site. Clothes are left damp and warm.
Common causes of E:01
- Lint filter clogged
- Exhaust vent duct blocked or crushed
- Overheat sensor tripped by restricted airflow
1. Stop the dryer and let it cool for at least 30 minutes. 2. Pull out the lint filter and clean off all lint, rinsing it if it feels waxy from dryer sheets. 3. Check the vent hose behind the dryer and the outside vent flap for lint. 4. Restart on a short cycle. If E:01 returns, call us.
- Restricted airflow is a fire concern, so repeated restarts are not wise.
- A cleaned filter that still trips points to the duct or the burner.
- We give a written price before any repair.
Technical reference
- Code
- E:01
- Appliance
- Bosch dryer
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dryer codes
Is E:01 serious?
It is a protective stop. The dryer ran hotter than it should because air could not leave. Treat it as a warning to clean and check the vent before using the dryer again.
Does my electric Bosch dryer show E:01?
The documented list we have is for the WTVC gas series. The electric WTMC twin is probably similar, and we confirm that on site. We confirm the details by model number.
How often should the vent be cleaned?
Often enough that airflow stays strong. Many homes need yearly cleaning, more with long runs. We can clean and test it during a visit. Tell us if your vent run is long.
Still seeing E:01?
A technician diagnoses it on site and gives you the price in writing before any work starts.