Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Dishwasher

Bosch Dishwasher Apexx B: Aqua Sensor Reads Green

On the lower line of the test program, Bosch Apexx SH_99 dishwashers such as the SHV99A03, SHX99B05 and SHY99A05 show letter B when the aqua sensor reads green. It pairs with A, which reads red. Bosch…

Low risk · DIY check OK
Code
B
Appliance
Dishwasher
Brand
Bosch
Warranty
30-day workmanship

What B means

On the lower line of the test program, Bosch Apexx SH_99 dishwashers such as the SHV99A03, SHX99B05 and SHY99A05 show letter B when the aqua sensor reads green. It pairs with A, which reads red. Bosch uses the two colors to show the aqua sensor's state, and a technician looks at both. It does not appear on the normal display.

Common causes of B

  • Aqua sensor reading green in the test program
  • Sensor state recorded for comparison
✓ One safe check you can try

1. No action is needed at home. 2. Keep the filters clean and the sump free of residue. 3. Run a normal cycle if you wish. 4. Call us if wash or rinse results seem off, or if cycles run long, so that we can read both the A and B entries in the test program.

! Why to stop there
  • The reading is only meaningful next to the A reading.
  • A technician compares both in the test program.
  • Guessing at a sensor wastes money.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
B
Appliance
Bosch dishwasher
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

BB questions
Is B a problem?

No. It reports a sensor state, not a failure. A technician reads it next to A to see how the aqua sensor is behaving, and nothing is replaced on that reading alone.

Why are there two colors?

Red and green are the sensor's two readings, shown as A and B. Comparing them is how the technician judges the sensor during the test.

How do you price a visit?

We write the price down before starting, and any repair is covered by our 30-day workmanship warranty. Your approval always comes first, and there is no obligation.

Book a visit

Still unsure about B?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit