Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Dishwasher

Bosch Dishwasher Apexx E: Water Switch Sends No Pulses

Bosch Apexx SH_99 dishwashers such as the SHV99A03, SHX99B05 and SHY99A05 can show letter E on the lower line of the test program. It means the water switch is giving no pulses. The water switch directs…

Medium · inspection needed
Code
E
Appliance
Dishwasher
Brand
Bosch
Warranty
30-day workmanship

What E means

Bosch Apexx SH_99 dishwashers such as the SHV99A03, SHX99B05 and SHY99A05 can show letter E on the lower line of the test program. It means the water switch is giving no pulses. The water switch directs wash water between the spray areas, so one rack may come out cleaner than the other. Owners cannot normally see this without the test program.

Common causes of E

  • Water switch not giving pulses
  • Water switch wiring or connector
  • Control module not reading the switch
✓ One safe check you can try

1. Run a normal cycle and see whether both racks are washed evenly. 2. Cycle the breaker off for a minute, then back on. 3. Do not open the base. 4. Call us if one rack stays dirty or you know E was read; the switch, its wiring and the control are tested with a meter.

! Why to stop there
  • The switch sits in the pump area with wiring.
  • The pulse signal can be lost in the switch, wiring or module.
  • A test program reading narrows it down.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
E
Appliance
Bosch dishwasher
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

EE questions
What are pulses?

The water switch sends signals as it moves so that the control knows it reached position. With no pulses, the control cannot confirm the switch moved, which is why we inspect the switch and its wiring.

How is E different from G?

E means the switch gives no pulses at all, while G means the switch will not stop running. They are separate readings, so each points us to a different part of the diagnosis.

Is a price given first?

Yes, in writing before work. Any repair is covered by our 30-day workmanship warranty, and you approve the price first, so there are no surprises when we finish the job.

Book a visit

Still seeing E?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit