Bosch Dishwasher Apexx H: Heating System Problem in Test Program
Bosch Apexx SH_99 dishwashers such as the SHV99A03, SHX99B05 and SHY99A05 show H on the lower line of the test program for a heating system problem. The dishwasher is not heating water as the control expects.…
- Code
- H
- Appliance
- Dishwasher
- Brand
- Bosch
- Warranty
- 30-day workmanship
What H means
Bosch Apexx SH_99 dishwashers such as the SHV99A03, SHX99B05 and SHY99A05 show H on the lower line of the test program for a heating system problem. The dishwasher is not heating water as the control expects. You may notice cool dishes, wet loads or cycles that run long, though only the test program names the cause as heating. The listed parts include the heater and its relay.
Common causes of H
- Heater not heating
- Hi-Limit or flow switch problem
- NTC temperature sensor reading wrongly
- Control module heater relay
1. Check that your kitchen hot tap runs hot. 2. Briefly kill the breaker, wait a minute, and switch it on again. 3. Run a normal cycle and feel whether dishes come out warm. 4. Do not open the base. 5. If they stay cool, call us; the heater, Hi-Limit, flow switch, NTC and relay are tested one by one.
- Heater circuits involve live wiring in a wet appliance.
- Several parts give the same result.
- Readings choose the right part.
Technical reference
- Code
- H
- Appliance
- Bosch dishwasher
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dishwasher codes
Is H the same as code 2 on older Bosch machines?
Yes in meaning. On older two-digit machines, the heating problem is code 2, and on the full-text Apexx test program it appears as H. The tests are the same.
Could cold supply water cause it?
It can slow heating, so we check the supply temperature as well as the parts. If the hot tap is cold, the water heater is the first thing to look at.
Do you quote beforehand?
Yes, in writing before work. Repairs are covered by a 30-day workmanship warranty, and the price is explained so you know what each part costs.
Still seeing H?
A technician diagnoses it on site and gives you the price in writing before any work starts.