Bosch Dryer E:13: Maximum Drying Time Exceeded
E:13 on Vision 300 series WTVC gas dryers such as the WTVC4500UC and WTVC5530UC means the maximum drying time was exceeded. The dryer ran to its limit and clothes were still not dry enough. The electric…
- Code
- E:13
- Appliance
- Dryer
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E:13 means
E:13 on Vision 300 series WTVC gas dryers such as the WTVC4500UC and WTVC5530UC means the maximum drying time was exceeded. The dryer ran to its limit and clothes were still not dry enough. The electric WTMC twin likely behaves the same, but the manual does not say, so we check on site. This is the dryer E:13, not the washer drain code of the same number on other Bosch lines.
Common causes of E:13
- Lint filter or vent restricted
- Moisture sensor dirty
- Load too wet or too large
1. Clean the lint filter. 2. Wipe the moisture sensor bars in the drum. 3. Spin laundry well in the washer and reduce the load size. 4. Check the vent hose and outside flap, then run a timed cycle. If E:13 returns, call us.
- A long drying time costs energy and wears fabrics.
- A vent that is too long or crushed needs measurement.
- Written price first.
Technical reference
- Code
- E:13
- Appliance
- Bosch dryer
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dryer codes
Is E:13 related to E:03?
Yes. E:03 is dryness not reached; E:13 is the maximum time exceeded. Both come from the same causes, so the first checks are the same.
Does it matter that washers also use E:13?
Yes, the number is shared. Older washers use E:13 for drain pump time. Check which appliance you have and which table applies before you search further.
Will a clean filter fix it?
Often it does, along with a clean vent. If not, we check the vent length and the sensor, then quote in writing before anything is replaced.
Still seeing E:13?
A technician diagnoses it on site and gives you the price in writing before any work starts.