Bosch Dryer E:12: Repeated Overheating Events
E:12 is documented for Vision 300 series WTVC gas dryers such as the WTVC4500UC and WTVC5530UC, and it prints with a colon. Bosch calls it fluffing level 2: overheating level 2, where the burner temperature rose…
- Code
- E12
- Appliance
- Dryer
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E12 means
E:12 is documented for Vision 300 series WTVC gas dryers such as the WTVC4500UC and WTVC5530UC, and it prints with a colon. Bosch calls it fluffing level 2: overheating level 2, where the burner temperature rose more than a set limit in 5 seconds, 25 times. The usual cause is restricted airflow. The displayed overheating code on these dryers is E:01.
Common causes of E12
- Restricted airflow through the filter or vent
- Repeated burner overtemperature
1. Stop the dryer and let it cool completely. 2. Pull the lint filter, clean it, and wipe its housing with a dry cloth. 3. Check the vent hose behind the dryer for crushing and the outside flap for lint. 4. Run a short timed cycle with a small load. If E:12 or E:01 appears again, stop using the dryer and call us.
- Repeated overheating events harm the burner and fabrics.
- The cause can be a blocked vent that only measurement can show.
- Written price first.
Technical reference
- Code
- E12
- Appliance
- Bosch dryer
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dryer codes
What is the difference between E:11 and E:12?
E:11 is one event, level 1. E:12 is level 2, with 25 events in a row. Both are warnings that air is not moving through the dryer freely, so clean the filter and vent.
Why do I see E:01 but not E:12?
Bosch notes that the overheating code usually shown on the display is E:01. E:12 is mainly a service record, so you may never see it unless a technician checks.
Does an electric dryer use it?
The electric WTMC twin may use it too, though the manual does not say. We confirm by model number. Either way, airflow is the first thing we check.
Still seeing E12?
A technician diagnoses it on site and gives you the price in writing before any work starts.