Bosch Dryer E:03: Dryness Level Not Reached
E:03 can appear on Vision 300 series WTVC gas dryers such as the WTVC4500UC and WTVC5530UC when the degree of dryness was not reached or drying time ran too long. Bosch's table lists a dirty moisture…
- Code
- E:03
- Appliance
- Dryer
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E:03 means
E:03 can appear on Vision 300 series WTVC gas dryers such as the WTVC4500UC and WTVC5530UC when the degree of dryness was not reached or drying time ran too long. Bosch's table lists a dirty moisture sensor, a blocked or overly long exhaust duct, a dirty filter, laundry that was too wet, the wrong program, or dryness not set correctly. Clothes finish damp.
Common causes of E:03
- Moisture sensor bars dirty
- Exhaust duct blocked or too long
- Lint filter dirty
- Laundry too wet, wrong program, or dryness not set properly
1. Clean the lint filter. 2. Wipe the metal moisture sensor bars inside the drum with a damp cloth. 3. Make sure the load was spun well in the washer and is not oversized. 4. Choose a program that fits the fabric, check the dryness setting, and restart. If E:03 repeats, check the vent run and call us.
- Most of this list is owner-checkable, but a long or crushed vent needs a technician to measure.
- Repeated long cycles waste energy and wear fabrics.
- The price comes in writing before any work.
Technical reference
- Code
- E:03
- Appliance
- Bosch dryer
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dryer codes
Is E:03 a breakdown?
Often not. Bosch describes it as the dryness target not being reached, which is usually airflow, a dirty sensor, or a load issue. A quick filter and sensor cleaning is the first move.
What is E:13 on the same dryer?
E:13 means the maximum drying time was exceeded. It is closely related to E:03 and has the same first checks. If you see either, clean the same things first.
Why wipe the sensor bars?
Fabric softener and dryer sheet residue can coat them, so the dryer cannot tell when clothes are dry. Wiping them with a damp cloth every month or two keeps the dryness sensing accurate and the cycles short.
Still seeing E:03?
A technician diagnoses it on site and gives you the price in writing before any work starts.