Bosch Dryer E:18: Heater Sensor Sees No Temperature Rise
E:18 is listed for Vision 300 series WTVC gas dryers like the WTVC4500UC and WTVC5530UC as a heater-NTC problem. Bosch's text says there was no temperature rise after starting a program, which suggests a break in…
- Code
- E:18
- Appliance
- Dryer
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E:18 means
E:18 is listed for Vision 300 series WTVC gas dryers like the WTVC4500UC and WTVC5530UC as a heater-NTC problem. Bosch's text says there was no temperature rise after starting a program, which suggests a break in the heater circuit; check the heater circuit and the bimetal switch and replace damaged parts. The drum turns, but the air stays cool. You may also notice a Filter light or an early end to the cycle.
Common causes of E:18
- Heater circuit broken
- Bimetal switch open
- Heater sensor (NTC) damaged
1. Turn the dryer off and unplug it. 2. Clean the lint filter. 3. Plug in and run a short timed cycle; check whether warm air reaches the drum. 4. If E:18 returns, stop and call us. Do not open the cabinet or work on gas parts.
- No heat could be a sensor, switch, or burner issue, and each has a different repair.
- The gas side is not an owner job.
- You approve the price in writing.
Technical reference
- Code
- E:18
- Appliance
- Bosch dryer
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Dryer codes
Does E:18 mean the dryer is not heating at all?
It means the sensor saw no temperature rise after start. That points to a break in the heating path. The dryer may keep tumbling without producing heat.
What is a bimetal switch?
A small safety switch that opens when the part gets too hot or stays open if damaged. Bosch asks us to check it. It protects against overheating by opening at a set temperature.
Can I tell gas from electric?
Gas dryers have a gas line behind them, while electric ones use a heavy four-prong or three-prong cord. If unsure, give us the model number and we will confirm.
Still seeing E:18?
A technician diagnoses it on site and gives you the price in writing before any work starts.