Bosch Refrigerator r1: Fresh Food Sensor Reading Out of Range
The lowercase r1 appears on Bosch 800 and 500 Series Evolution refrigerators such as the B26FT70SNS and B26FT70SNS/04 when the R-sensor in the fresh food compartment reads Lo or Hi. Bosch has the sensor measured across…
- Code
- r1
- Appliance
- Refrigerator
- Brand
- Bosch
- Warranty
- 30-day workmanship
What r1 means
The lowercase r1 appears on Bosch 800 and 500 Series Evolution refrigerators such as the B26FT70SNS and B26FT70SNS/04 when the R-sensor in the fresh food compartment reads Lo or Hi. Bosch has the sensor measured across connector CN15 on the main board and replaced if it has failed. Fresh food temperatures may wander because the control lost its reference. Expect small swings.
Common causes of r1
- Fresh food R-sensor has failed
- Loose connector at CN15 on the main board
- Damaged sensor wire
1. Make sure food is not blocking the vents inside the fresh food section. 2. Unplug the refrigerator for five minutes, then plug it back in. 3. Put a thermometer in the compartment and read it after a few hours. 4. If r1 comes back, or milk and produce feel warm, call us and avoid changing the temperature settings.
- The sensor reading is taken at the main board.
- A reading that is high or low points to the sensor, not the cooling system.
- We confirm before replacing anything.
Technical reference
- Code
- r1
- Appliance
- Bosch refrigerator
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Refrigerator codes
Why a lowercase r?
The display uses lowercase r for the fresh food R-sensor and a capital F for the freezer sensor. The letters are how Bosch tells the sensors apart in its table.
Is my food safe with r1 on the display?
Check the compartment with a thermometer. If it reads warmer than a normal refrigerator, move perishables into a cooler or another fridge until the sensor has been replaced.
Which connector is checked?
Connector CN15 on the main board. We measure across it to see whether the sensor reads open or shorted, then replace the R-sensor and confirm the code clears.
Still seeing r1?
A technician diagnoses it on site and gives you the price in writing before any work starts.