Bosch Refrigerator rD: Fridge Evaporator Defrost Sensor Problem
The code rD on Bosch 800 and 500 Series Evolution refrigerators such as the B26FT70SNS and B26FT70SNS/01 reports that the fridge evaporator defrost sensor reads Lo or Hi. Bosch checks it at connector CN15 on the…
- Code
- rD
- Appliance
- Refrigerator
- Brand
- Bosch
- Warranty
- 30-day workmanship
What rD means
The code rD on Bosch 800 and 500 Series Evolution refrigerators such as the B26FT70SNS and B26FT70SNS/01 reports that the fridge evaporator defrost sensor reads Lo or Hi. Bosch checks it at connector CN15 on the main board. With the sensor unreliable, the control cannot judge when the fresh food evaporator has finished defrosting, so cooling may become uneven. Expect uneven cooling.
Common causes of rD
- Fridge evaporator defrost sensor has failed
- Loose connector at CN15
- Damaged sensor wire
1. Look in the fresh food compartment for water pooling at the back or frost on the rear wall. 2. Keep food a little away from the rear wall. 3. Leave the refrigerator unplugged for about five minutes before plugging it in again. 4. If rD comes back, leave the interior panels alone and call us for sensor testing.
- The sensor is mounted on the fridge evaporator behind panels.
- Readings come from the main board connector.
- A wrong guess could mean replacing a sensor that is fine.
Technical reference
- Code
- rD
- Appliance
- Bosch refrigerator
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Refrigerator codes
How does rD differ from FD?
rD concerns the evaporator on the fresh food side and FD the freezer evaporator. Each has its own sensor, so the code tells us which one to test first.
Can I keep using the refrigerator?
Usually yes for a short time, but watch the temperatures with a thermometer, because defrost timing on the fresh food side may be off and food near the rear wall can freeze or warm.
What does the repair involve?
We test the sensor and connector CN15, replace the sensor if it reads Lo or Hi, and check that the code clears. A written price comes before work, with a 30-day workmanship warranty.
Still seeing rD?
A technician diagnoses it on site and gives you the price in writing before any work starts.